Material: |
Parts from disassembled jet engines (repair, maintenance): parts from stainless steel (0.1 kg and 80 mm diameter), parts from Nickelbase alloy (20kg, 550 mm diameter), parts from Titan |
|
METAL / NON METAL : |
stainless steel, titanium, nickel-based alloy |
| Shape
: |
smooth surfaces, a complicated geometry |
|
Utilisation of equipment (throughput,workload) in % : |
No statement |
|
Maximum possible throughput of parts per year : |
122.000 |
|
Max. area which can be cleaned per year : |
No statement |
Dirt: |
mineral oil, grease, burned oils |
|
Previous process : |
Dissassembling of the jet engines |
|
|
|
|
|
|
|
|
|
Equipment: |
Einkammer Spritzreinigungsanlage |
|
Size of working chamber, Größe der Arbeitskammer ca. 1,5 x 1,5 x 1,5 m |
Process: |
Multitask equipment,Confined spray cleaning, low pressure (below 14-20 bar) 1. Spray-cleaning from a 800 ltr. bath (10%), 5 min. at 50°C; 2. Rinsing from a 400 ltr. bath (10%), 3.3 min. at 50°C; 3. Drying, warm air, 21.7 min. |
|
Duration of cleaning process for one part (min.) : |
No statement |
|
Duration of cleaning process for the charge (min.) : |
30.00 |
|
Recycling : |
Step:1 So far (2/2007) there has been no bath exchange (13 months)
Step:2 No statement
Step:3 No statement
|
Quality: |
No statement from company No residue shown at wipe test, hydrophilic |
Subsequent process: |
measurement, testing, Crack inspection |
Costs: |
Total sum
:
No statement
|
